Total Price: $0.00
Contact Information
ELVEFLOW OB1 MK4 Microfluidic Flow Controller - 2234
SKU: OB1_4-2234
To better serve you, we would like to discuss your specific requirement.
Please Contact Us for a quote.
ELVEFLOW OB1 MK4 Microfluidic Flow Controller - 2234
Buy ELVEFLOW products from MSE Supplies at the best value.
Product Description
4-Channels Pressure & Flow Control Unit.
Channel #1 = 2000 mbar | Channel #2 = 2000 mbar | Channel #3 = 8000 mbar | Channel #4 = -900/1000 mbar.
All necessary fittings & tubing are available in the Kit Fitting OB1 Starter Pack Push-in.
Includes one Microfluidic Air Flow Cleaner Kit (5 µm pore size pneumatic filter).
Elveflow® Smart Interface software included.
Important note: additional pressure (6.5-10 bar) & vacuum sources are required.
Cutting-edge Microfluidic Flow Controller
Designed by scientists for scientists, the versatile and powerful OB1 MK4 pressure controller provides the perfect flow control for all kinds of applications.
Whether you need pressure or vacuum, low or high flow rate, for short or week-long processes and experiments, the OB1 MK4 is the ideal instrument for your microfluidic needs.
The Best Performance in the Market: Piezoelectric Technology
The Elveflow OB1 MK4 is the only microfluidic flow control instrument worldwide to use piezoelectric regulators. The piezoelectric technology gives you 20 times more precise and 10 times faster flow control than any other flow controller on the market.
Customizable & Upgradable: 1 Module, Up to 4 Channels, 5 Pressure & Vacuum Ranges Available
The OB1 MK4 can be configured according to your needs. In one piece of equipment, you can have up to 4 pressure and/or vacuum channels (and other customized options). If your needs change, the instrument can be upgraded later, in any way you want.
Get the Fastest Flow Rate Control When Paired with a Flow Sensor
Connect the OB1 MK4 to a standard liquid flow rate sensor (MFS) or our premium Coriolis flow sensor (BFS, suited to both liquid and gas) to directly control the flow rate in your chip. The system continuously calculates the pressure and maintains the desired and constant flow rate.
Full Control Software, SDK, and UART Communication
Single and intuitive software to get started in a few clicks and automate the most complex and long experiments. The SDK libraries allow you to control the OB1 MK4 using your own code while connecting it to other instruments. The MK4 is also equipped with UART communication protocol in addition to the ESI and SDKs control, allowing it to communicate with most control systems, such as Mac, Linux, Arduino, PLC.
OEM Version Available
The OB1 MK4 can be used on a bench setup or embedded in your own product. Elveflow has a solution for every step of your research & development. Discover our OB1 MK4 OEM solution.
Specifications
| Pressure Range | 0 to 200 mbar (1) (0 to 2.9 psi) | 0 to 2,000 mbar (1) (0 to 29 psi) | 0 to 8,000 mbar (1) (0 to 116 psi) | -900 to 1,000 mbar (1) (-13 to 14.5 psi) | -900 to 6,000 mbar (1) (13 to 87 psi) |
| Pressure stability (2) | 0.015 % FS 30 μbar (0.0004 psi) |
0.005 % FS 100 μbar (0.0014 psi) |
0.006% FS 500 μbar (0.007 psi) |
-900 to 500 mbar | -900 to 2000 mbar: |
| 0.005 % FS 100 μbar (0.0014 psi) |
0.005 % FS 350 μbar (0.05 psi) |
||||
| 500 to 1,000 mbar: | 2,000 to 6,000 mbar: | ||||
| 0.007 % FS 150 μbar (0.0021 psi) |
0.007 % FS 525 μbar (0.076 psi) |
||||
| Response time (3) | down to 10 ms | ||||
| Settling time (4) | down to 50 ms | ||||
| Minimum pressure increment | 0.006 % FS 12 μbar - 0.00017 psi |
0.006 % FS 120 μbar - 0.0017 psi |
0.006 % FS 480 μbar - 0.007 psi |
0.0064 % FS 120 μbar - 0.0017 psi |
0.0061 % FS 420 μbar - 0.006 psi |
| Pressure supply | 1.5 bar (or Max pressure + 0.5 bar) to 10 bar Non corrosive, non explosive, dry and oil-free gases, e.g. air, argon, N2, CO2, ... |
||||
| Input vacuum (5) | / | Any value from -0.7 to -1 bar Compatible with vacuum pump or vacuum line |
|||
| Liquid compatibility | Non contact pump Any aqueous, oil, or biological sample solution. |
||||
(1) Max pressure value might vary by +/- 2.5%
(2) Pressure stability (standard deviation) measured over the full pressure range with an external high accuracy pressure sensor (Druck DPI150) (3) Time required to reach 5% of the setting point. Depends on the computer operating system (4) Time required to reach 95% of the set point. Volume dependent – Measurement was done on 12 mL reservoir for a set point from 0 to 200 mbar (5) A vacuum source is mandatory for calibration and use of dual channels even if the channels are to be used in pressure only.
| FLOW CONTROL | |||||
| Flow sensor compatibility |
Compatible with the whole MFS and BFS range Monitoring and feedback loop flow control available |
||||
| Flow rates |
From 0.1 µL/min to 500 mL/min (indicative, please refer to the MFS and BFS series) |
||||
| Liquid Compatibility |
Non contact pump Any aqueous, oil, or biological sample solution. |
||||
| CONTROL & MONITORING | |||||
| Software control |
Elveflow Smart Interface Windows 7, 8 and 10, both 32 and 64 bit versions supported |
||||
|
Software Development Kit |
Librairies available: Matlab, Python, Labview, C++ Windows 7, 8 and 10, both 32 and 64 bit versions supported Serial/UART communication protocol on request |
||||
| Data management | Possibility to log and extract data (.csv): channel and sensor detailed information using ESI | ||||
| Input profiles | Possibility to load profiles: ramp, sine, triangle, square or custom | ||||
| Automation |
Generate step-by-step sequences using the ESI built-in sequencer Load and save custom configurations (.csv) |
||||
| Screen | LCD screen showing pressure and sensor from the channel | ||||
| ELECTRICAL CONNECTION | |||||
| USB connection | USB B | ||||
| Sensor connection |
One M8-4 pins connecter available per channel Compatible with Elveflow sensors: MFS, MPS, MFP, MBD Custom analog sensor supply: 5-24VCustom analog sensor readout : 0-10V |
||||
| TTL trigger |
In and out available 0-5V |
||||
| OTHER | |||||
| Power consumption | 12 W (100 V to 240 V – 50 Hz to 60 Hz) | ||||
| Casing dimensions (5) | (length x width x height): 240 x 223 x 80 mm | ||||
| Weight | 1.4 kg to 2.9 kg | ||||