
MSE PRO Conductive Silver Paste
SKU: PO8116
MSE PRO™ Conductive Silver Paste
Product Details
Due to the special nature of the product, it is recommended to store it refrigerated according to the corresponding conditions upon receipt;
It is recommended to use MSE PRO-A-03 (high-temperature cured silver paste) in summer for more convenient transportation and storage.
MSE PRO-A-01 percentage of silver(83%)
MSE PRO-A-02 percentage of silver(77%)
MSE PRO-A-03 percentage of silver(85%)
Note:
1. Use 150-300 mesh polyester or stainless steel screen printing, with a scratch hardness of 65-80 degrees;
2. Mix thoroughly before use. Add diluent or resistance regulator and stir evenly before use. It is recommended to stir slowly in the same direction;
3. The printing substrate must be cleaned thoroughly. If there are residual oils, oxides, hand sweat, and other pollutants, it will seriously reduce adhesion and electrical performance;
4. Sufficient ink must be used during printing, otherwise it will affect printing performance and ink printing thickness, leading to changes in resistance;
5. To ensure consistent ink performance, it is advisable to maintain the same viscosity during printing; When adding diluent, the silver paste should be collected and mixed with a portion of the new silver paste. Then, an appropriate amount (less than 5%) of specialized diluent should be added and thoroughly stirred until uniform;
6. Curing must be thorough, otherwise the desired characteristics cannot be obtained.
7. Period of validity: 6 months
-
Safe use:
If the slurry is accidentally swallowed, inhaled, or comes into contact with the skin, it is harmful. Therefore, it should be cleaned immediately after use, and contact with eyes, skin, or clothing should be avoided. Do not approach fire or combustibles. Because it is flammable, it should be covered tightly when not in use to avoid the entry of volatile gases, and air circulation should be maintained during use.