PrimeLab 2.0 Photometer Starter-Kit (All Current and Future Parameters Activated/without Reagents)
SKU: PL02BALL
PrimeLab 2.0 Photometer Starter-Kit (All Current and Future Parameters Activated/without Reagents)
The PrimeLab 2.0 launched by Water-i.d. Highly accurate readings on 18 parallel wavelengths, Bluetooth-USB-WiFi-4G* connections, powerful software and app, synchronized over a cloud-service, large HD touch display and the option to connect test probes are just some features of the new PrimeLab 2.0.
Buy Water i.d. products from MSE Supplies at the best value. MSE Supplies is an authorized distributor for Water-i.d. GmbH.
Features:
- Whilst normal photometers perform tests on one selected wavelength only, the PrimeLab 2.0 receives data from 18 different wavelengths in parallel with each measurement, covering the key parts of UV and IR section of the spectrum and the full VIS range.
- 3 sensors with 6 wavelengths each are connected to each other Correspondent LEDs are set up at 180° as well as at 90° to enable NTU-Turbidity, PTSA and Fluorescein measurements as well.
- Very narrow peaks between 390 and 950 nm allow utmost accurate readings, similar to the performance of a spectrophotometer.
- The highly professional PrimeLab 2.0 firmware interpolates between the different wavelength-readings whilst parameter curves are set up to use multiple wavelengths to obtain the most accurate test results.
Technical Data:
Dimensions | 10cm x 25.5cm x 5.9cm (width x length x depth) |
Weight | 715g |
Spectral range | 390nm - 950nm 18 wavelength, peaks at 410/435/460/485/510/535/560/ 585/610/645/680/705/730/760/810/860/900/940nm 180° and 90° Setup for direct and indirect measurement |
Parameters | more than 140 parameters (flexible setup) User defined parameter function |
Electrodes | USB-type-C connector for pH/EC/TDS/ORP/Temp-Probes |
Connectivity (technical) |
Bluetooth 4.2 WiFi USB (type C) 4G* (via USB-modem) |
Connectivity (software) |
LabCOM Software (Windows / Mac) LabCOM App (Android / iOS) LabCOM Cloud (web-browser) |
Display | 5.5" Color-HD touch display |
Camera | In-build barcode / QR-code scanner |
Calibration | Auto-calibration function with certificate (software) |
One-Time-Zero | Inteligent OTZ (One-Time-Zero) function with recognition of ZERO types |
Internal memory | >5,000 |
Clock/Date | RTC (Real-Time-Clock) with calendar function |
Auto-Off | Factory default setting = 10 minutes. Individual adjustment possible |
Menu guidance | Intuitive, display-controlled 4-button menu guidance; test instructions during measurement process |
Power supply | 8,500 mA Li-lo-battery |
Languages | >15 |
Environment | 5°C - 45°C / 30 - 90% rel. humidity |
Water-proof rating | The device is splash-water-proof (IP54) |
Reagents | The calibration curves for the individual parameters / measurement procedures are adjusted to the reagents offered by Water-i.d. Using reagents from other manufacturers may lead to wrong readings / higher tolerances. PrimeLab reagents are entirely "Made in Germany" or "Made in UK"! |
Kits List:
PrimeLab 2.0 Starter-Kit (All Current and Future Parameters Activated/without Reagents)
1 x grey plastic carrying-case with foam insert
1 x PrimeLab 2.0 Multitest Photometer
5.5" HD-Colour-Touch Display
16 wavelengths-scan (410 - 940nm)
"90° ready" for NTU, PTSA, Fluorescein, Plankton
Option of over 140 different parameters (chargeable activation required)
8.400 mAh Li-Ion-battery (built-in)
Bluetooth 4.2
WiFi USB Type C 4G* (via USB-Type-C Modem)
Option to connect Electrodes (via USB Type C plus A/D-charger-Box)
built-in camera to scan QR-Codes
Self-Calibration-Mode with certificate (via LabCOM Software)
"I-OTZ" Intelligent-One-Time-Zero
compatible to the free of charge PrimeLab tools: LabCOM App/Software/Cloud (Android, iOS, Windows, Mac, Browser)
10 x 24mm/10ml glass-vials with lid (light-shield incorporated into the lid)
1 x light shield (for 16mm and 1ml vials as well as check-standards)
1 x 24mm vial adapter (built-in; exchangeable)
1 x 16mm vial adapter
1 x 1ml Eppendorf-vial adapter
2 x 10.5 cm stirring rod
1 x 10ml syringe
1 x cleaning brush for vials
1 x microfibre cleaning cloth for vials
1 x Bluetooth USB dongle
1 x charger with cable (USB-Type-C)
1 x Luer lock syringe (20ml) with adapter for filter holder
1 x Filteradapter for 20ml Luer-Lock-Spritze
1 x can with 50 Filterpapieren GF/C (25mm)
1 x can with 50 Filterpapieren 0.4µ (25mm)
1 x 100ml can with Deckel (for dilution)