Magnetic Mount Electrochemical H-Cell

Magnetic Mount Electrochemical H-Cell

Buy Redox.me products from MSE Supplies at the best value.

This is a horizontally mounted, double compartment electrochemical H-Cell. The cell elements are made of PEEK. It well fits aqueous (FKM/EPDM O-Rings) and organic solvent (FFKM O-Rings) electrolyte requirements. The construction is gas-tight having two separate chambers, each equipped with gas inlet and outlet. This allows bubbling the solution and evacuating gases. Chambers are separated with an ion-exchange membrane (e.g. DuPont’s Nafion® membrane), so the electrochemical products appearing at working and counter electrode do not affect the opposite electrode.

Application note:

This cell allows several approaches to perform measurements in 2- or 3-electrode setups. It is designed to investigate the performance of a material (e.g. nanocrystalline material or conducting polymer) deposited on a working disk electrode, material drop-casted on a metal mesh or a metal foil current collector, or electrochemically active objects installed in a Tantalum clip. The metal wire counter electrode is mounted in the second chamber, while the reference electrode is mounted in a lid of the same chamber as the working electrode. Various counter electrodes are suitable for this cell including metal wire, gauze and foil electrodes as well as non-metal electrodes such as graphite rod. Typical applications include: basic electrochemistry, long-term measurements, RE potential measurements as well as electrosynthesis.

Specification:

Nominal exposure area of an ion-exchange membrane: 1 cm²
Minimum electrolyte volume: 2x10 mL
Maximum electrolyte volume: 2x15 mL
Electrode plug diameter: 6 mm
Maximum ion-exchange membrane thickness: 3 mm

Product Includes

2 x lid – 0001CPEMA
2 x chamber
2 x plug

Setup Includes:

mm Ec H-Cell 2 X 15 ml - Magnetic Mount Electrochemical H-Cell 2 X 15 ml, Ec H-Cell 2 X 15 ml - Screw Mount Electrochemical H-Cell 2 X 15 ml
Metal Wire Auxiliary Electrode - 50Hx15 0.6/250 mm, Platinum (99,9%), 1 mm Dia. Gold Plated Pin
Silver / Silver Chloride Reference Electrode - AG/AGCL 30 mm, Non-Aqueous - AG/AG+ 30 mm
Working Disk Electrode - 2 mm Dia., Peek Body 6 mm Dia. - 70 mm, Glassy Carbon
10 Pcs Of Tantalum Wire Clip With Septum Plug 0.6 mm Dia., 60 mm Long