
ATTO WSC-2400 Seesaw Shaker
SKU: WSC-2400
ATTO WSC-2400 Seesaw Shaker
Buy ATTO products from MSE Supplies at the best Value.
This ATTO SeeSaw Shaker is a metronome shaking device that is less likely to cause uneven shaking. Like a metronome, the entire swing table is tilted from the base of the swing table, so that the sample is at the same angle anywhere on the table. Therefore, there is little difference in the movement of the solution depending on where it is placed, and the overall mixture is uniform.
Purpose and Application
- Adopting a metronome system in which the entire shaking table is tilted at a uniform angle, no uneven shaking occurs no matter where it is placed on the
shaking table - Equipped with a large shaking table of about 30 x 20 cm as standard (about 6 pieces of mini gel)
- Adjusting the shaking speed is as simple as turning the knob
- Optional addition of a shaking table (two-stage) is possible.
- Optional fixtures (rubber straps with hooks) allow the use of centrifuge tubes, etc.
- Can be operated in a refrigerator (operating environment temperature 4°C~40°C)
- Comes with 2 styrofoam cases suitable for mini gel sizes
MSE Supplies is an authorized distributor of ATTO products.
Technical Data:
Shaking method | Metronome method * Shake back and forth (*The entire table tilts at the same angle with the axis of the shaking table as the fulcrum) |
Shaking speed and angle | 0~48 times rpm (without speed display) ±8 degrees |
Maximum load weight | 3.0 kg (0.8 kg for the upper row, 1.2 kg for the lower tier when using two stages) |
Shaking table dimensions (mm) | 309(W)×202(D) Approx. 6 mini gels |
Ambient temperature and humidity | Temperature 4~40°C Humidity 5~70% Only indoors |
Power | AC100~120V 50/60Hz Power Consumption 5W |
Dimensions(mm) | 303(W)×205(D)×165.2(H) |
Weight(Kg) | 4.7 |
Standard Accessories | Seesaw shaker body (with stick seat and AC cable) - 1 unit Instruction manual: 1 book Styrofoam case (10×10×2.9 cm with lid) - 2 pieces |